- HC-12 433Mhz SI4463 RF Wireless Serial Module
About
Description
HC-12 wireless RF UART communication module is a new generation of multi-channel embedded wireless data transmission module. The Radio frequency of 433.4 473.0MHz, can be setting a communication channel, step is 400kHz, a total of 100 channels. The module maximum transmit power is 100mW (20dBm), and -116dBm receiver sensitivity air of the 5000bps baud rate, communication distance about 500 meters. The module adopts a stamped hole encapsulation method, which can be welded. The module size is 27.4mm*13.2mm *4mm (including antenna seat, not including the spring antenna), which is convenient for the customer to be embedded in the application system. The module has a PCB antenna seat ANT1, users can use the coaxial cable, the use of 433MHz band external antenna. The module also has antenna welding hole ANT2, convenient user welded spring antenna. The user can choose one kind of antenna according to the request. The module contains MCU, users do not need to program in addition, just send and receive UART data. The module uses a variety of UART transmission mode, the user can choose according to the requirements of the use of AT command. The four UART modes of FU1, FU2, FU3, FU4, the average operating current is 3.6mA, 80A, 16mA and 16mA, the maximum operating current is 100mA (full power transmit state) HC12 Module is based on the SI4463 EZRadioPro family chip by SiLabs. This module offers a wireless data transmission and reception range of approximately 1 km in the open air. Its a low power radio chip that is ultra-easy to use. This module has an onboard STM8S003F3P6 MCU which is communicating with the SI4463 so that the user can communicate with the HC12 module using a simple TTL 2 wire serial interface (RX, TX, GND).
Characteristics
- Info
Serial TTL (RX, TX, GND) interface Modulation (G)FSK, 4(G)FSK, (G)MSK, OOK
- Info
Supply voltage: 3. 2V~5. 5V
- Info
Operating frequency range: 433. 4-473
Similar Items You Might Like
Based on what customers bought
- SalePROJECTBASEGH
ESP32-WROOM-32S: 38pins
GH₵ 120.00
- SalePROJECTBASEGH
HC-05 Bluetooth
GH₵ 50.00
- SalePROJECTBASEGH
WeMos D1 Mini (ESP-12F) V2
GH₵ 55.00
- SalePROJECTBASEGH
SIM800L GSM Module
GH₵ 55.00
- Out of StockPROJECTBASEGH
XBee module
GH₵ 150.00
- SalePROJECTBASEGH
DT-06 WiFi UART Wireless Module (ESP8285-based)
GH₵ 50.00
- SalePROJECTBASEGH
NEO-6M-0-001 GPS Module
GH₵ 70.00
- SalePROJECTBASEGH
SIM 800L V2.0 5V Wireless GSM GPRS MODULE Quad-Band
GH₵ 95.00
- SalePROJECTBASEGH
HC-12 433Mhz SI4463 RF Wireless Serial Module
GH₵ 50.00
- SalePROJECTBASEGH
LoRa-Ra-01 RF Transceiver Module
GH₵ 75.00
- SalePROJECTBASEGH
ESP32-C3 Zero Development Board
GH₵ 70.00
- SalePROJECTBASEGH
WeMos D1 mini Pro ESP8266
GH₵ 60.00
- SalePROJECTBASEGH
ESP32 Board WiFi -Bluetooth Dual Core 38Pin (Type C)
GH₵ 120.00
- SalePROJECTBASEGH
ESP32 Board WiFi -Bluetooth Dual Core 38Pin
GH₵ 120.00
- SalePROJECTBASEGH
NodeMCU (V3 ) ESP8266
GH₵ 65.00
- SalePROJECTBASEGH
ESP32 C3 super mini board WIFI- Bluetooth: BT 5.0
GH₵ 50.00
HC-12 433Mhz SI4463 RF Wireless Serial Module
GH₵50 GH₵50
Tax included.
Quantity:
10 in stock now
Available now in limited quantities.
Next Day Delivery
Lightning-fast delivery, guaranteed.
Free 90-day returns
Shop risk-free with easy returns.
About
Description
HC-12 wireless RF UART communication module is a new generation of multi-channel embedded wireless data transmission module. The Radio frequency of 433.4 473.0MHz, can be setting a communication channel, step is 400kHz, a total of 100 channels. The module maximum transmit power is 100mW (20dBm), and -116dBm receiver sensitivity air of the 5000bps baud rate, communication distance about 500 meters. The module adopts a stamped hole encapsulation method, which can be welded. The module size is 27.4mm*13.2mm *4mm (including antenna seat, not including the spring antenna), which is convenient for the customer to be embedded in the application system. The module has a PCB antenna seat ANT1, users can use the coaxial cable, the use of 433MHz band external antenna. The module also has antenna welding hole ANT2, convenient user welded spring antenna. The user can choose one kind of antenna according to the request. The module contains MCU, users do not need to program in addition, just send and receive UART data. The module uses a variety of UART transmission mode, the user can choose according to the requirements of the use of AT command. The four UART modes of FU1, FU2, FU3, FU4, the average operating current is 3.6mA, 80A, 16mA and 16mA, the maximum operating current is 100mA (full power transmit state) HC12 Module is based on the SI4463 EZRadioPro family chip by SiLabs. This module offers a wireless data transmission and reception range of approximately 1 km in the open air. Its a low power radio chip that is ultra-easy to use. This module has an onboard STM8S003F3P6 MCU which is communicating with the SI4463 so that the user can communicate with the HC12 module using a simple TTL 2 wire serial interface (RX, TX, GND).
Characteristics
- Info
Serial TTL (RX, TX, GND) interface Modulation (G)FSK, 4(G)FSK, (G)MSK, OOK
- Info
Supply voltage: 3. 2V~5. 5V
- Info
Operating frequency range: 433. 4-473